 |
|
|
| |
|
|
|
|
|
|
- (1)
- (3)
- (2)
- (1)
- (1)
- (5)
- (1)
- (2)
- (3)
- (2)
- (1)
- (1)
- (2)
- (4)
- (1)
- (2)
- (1)
- (2)
- (7)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
The RV - C series robot arm reducer
|
| Supply Ability: |
5,000pcs/year |
| Related proudcts |
robot arm reducer, |
| Specifications |
CORT series |
| Price Term: |
FOB,CNF,CIF,EXW,etc. |
| Port of loading: |
Usual Ningbo,Shanghai,etc |
| Minimum Order |
1 pcs |
| Unit Price: |
USD200-5000 |
|
The RV - C series reducer
1, less than 1 gap arc - points back
2, hollow shaft hole diameter (maximum to 5) to save ***ce
3, into the hollow shaft of the auxiliary electrical installation
4, strong torsional rigidity, co***ct
5, parts and components to achieve more design flex
The RV - C hollow shaft reducer configuration center hole and component configuration, in order to achieve greater flexibility and ***ce saving design. Components contained in rolling contact parts can realize high efficiency, long service life and small gap, also designed a eccentric secondary reduction to increase the reduction ratio to choose at the same time to reduce vibration and inertia. Reducer also carry a large inside bearing, in order to achieve a greater load capacity, and minus the external support equipment requirements, so as to reduce design time and installation costs.
Designadvantages
1, the integrated Angle of bearing stiffness increased the speed reducer, and implements the reducer to support greater external load. Thus reducing the external support equipment requirements, reduced the number of parts required, increases the reliability and reduces the total cost.
2, one hundred percent of cycloid gear and pin gear meshing design continuously, which can realize large i***ct load capacity and small backlash, because of the force is evenly spread over the whole gear reducer.
3, patent double reduction mechanism to reduce the vibration, because two cycloidal gear in rotation at low speed, at the same time reduce the input shaft size reduces the moment of inertia. The first stage simply change the flat gear combinations can obtain all kinds of reduction ratio.
4, reducer in all use rolling contact parts are beneficial to achieve excellent start-up efficiency; Reduce the wear and tear for longer service life and reduce the backlash.
Longer service life and reliability
bothe tusk reducer contains a double reduction design patent, can provide greater torque, and on the premise of guarantee the high pre |
| Company: |
ZHEJIANG RED SUN MACHINERY CO.,LTD.
|
| Contact: |
Mr. Tony Ye |
| Address: |
S57 NORTH, MABU TOWN, PINGYANG COUNTY WENZHOU CITY, ZHEJIANG PROVINCE |
| Postcode: |
325043 |
| Tel: |
86-577-63655788 |
| Fax: |
86-577-63062606 |
| E-mail: |
|
|
|
Home
